iHip Sound Pods Only One Working Issue (Easy Methods To Fix)

Only one of the sound pods working can be the result of an incorrect initial run-through of the setup process, a faulty Bluetooth connection, a software bug, or physical damage.

Luckily, almost all of them can get fixed by performing a factory reset or unpairing and then pairing again. However, if there’s physical damage, it is difficult not only to troubleshoot but also to repair the audio device. In that case, purchasing a new pair would make more sense.

Why Does Only One of My Sound Pods Work

Probable reasons why only one of your sound pods is working are as follows.

1. Incorrect First-Time Set-Up

If your first time setting the sound pods up did not go right, the sound might come from only one side. That explains why the initial setup plays a crucial part in the overall experience of the iHip sound pods. Sometimes, the pairing isn’t right the first time, while other times, a second Bluetooth device interferes.

1. Remove both earbuds.
2. One of them will start to blink, indicating that it is in pairing mode.
3. Go to the Bluetooth settings of your device and select the earbuds. There might be a voice prompt saying that the buds are connected via Bluetooth or the LED indicators blinking in a particular manner.

If you don’t hear the prompt or see the LEDs blinking, perhaps the setup process is incomplete.

2. Low Battery Level

A low battery percentage can get in the way of a smooth pairing. That said, when you’re setting up your new iHip sound pods for the first time, chances are it will have somewhere around 40% charge left. That’s usually the case with brand-new rechargeable audio devices.

So, wait until your new sound pods get fully charged, and you can start the pairing process. Besides, make sure other nearby Bluetooth devices are not in pairing mode.

What Do I Do if Only One of My Wireless Earbuds Work

Hold the button on the earbuds to sync them with your Bluetooth device. When the process is complete, the buds may beep to notify about a successful sync. Here are the detailed steps for pairing your iHip sound pods and getting both earbuds to work.

1. Turn on Bluetooth on your smartphone or PC.
2. Press the multi-function button and hold for 3 seconds for the sound pods to power on.

3. Look for the LED indicators on the buds. They will start flashing red and blue, notifying that they are in pairing mode.
4. From your Bluetooth device, select SOUNDPODS to pair with it.

5. Once the pairing is successful, the LEDs will start slowly flashing in blue.

Both the sound pods should now work unless there’s a technical fault or a software bug.

How Do I Get Both iHip Sound Pods to Work?

There are two methods for getting both iHip sound pods to work.

Method 1: Reconnect the Earbuds to Each Other

How wireless earbuds like the iHip sound pods work is one earbud pairs directly to your phone while the other pairs to the first earbud. So, if the connection between the earbuds gets lost, they start misbehaving. Here’s what to do if that occurs.

1. Put your earbuds back into the case.

2. Close the lid of the case and wait for at least 10 seconds.

3. Doing so will power the earbuds off, and when you open the lid again, they will power back on. Meanwhile, the buds will get the chance to find each other again and get the parent-child pairing right.

Method 2: Re-Pair the Earbuds

True wireless earbuds often come with specific pairing methods so you can listen with one bud while the other charges in the case. So, it is rather easy to accidentally pair the secondary earbud on its own, which causes the unpairing of the primary one.

In that case, you can try unpairing the sound pods entirely and pairing them again. Also, the device may come with a fail-safe hard reset mode depending on your make and model. You can try doing that also or check the user manual to see what it suggests in such a scenario.

How Do You Fix One Side of Bluetooth Headphones Not Working

If none of the above works and you still have only one of your iHip sound pods working, chances are there’s a software bug on your unit. In this case, the only solution left is to reset the earbuds.

Manually Reset Your Earbuds

Here’s how you can reset your earbuds to get them up and running again.

1. Open Bluetooth settings in your device and look for SOUNDPODS or the name you set for the sound pods.
2. Click on the name and choose to Forget.
3. Next, put the earbuds back into the charging case. Leave the lid open.

4. Tap four times on one of the buds to see a blue LED blinking four times before it stops blinking and turns solid blue.
5. Do the same thing with the other earbud left.
6. Now, pick the earbuds out of the case while keeping a 2-inches distance between them. 

7. The LED on the left bud should flash white while that on the right one blinks blue and white. The colors, however, may vary depending on the make and model.
8. Next, go to Bluetooth settings and wait for your device to recognize the sound pods. Make sure the earbuds and your device are well within the Bluetooth range.
9. Once the name pops up, you can select it for pairing.

Final Words

The last solution for one earbud not working is to reset the iHip sound pods back to their factory settings. But if that doesn’t seem to work either, chances are one of your earbuds went through some physical damage. So, try to get it repaired or replaced if still under warranty.