[4 Fixes] Dish Dual Mode Not Working

A dish network DVR has two different modes: Single Mode and Dual Mode. Dual mode allows users to watch different programs on different TVs that are hooked to the Dish satellite.

Though it isn’t possible to cancel one mode to go to another mode, many users have reported that the dish dual mode is not working with their DVR. If you are facing the same, then it is probably because either you’ve set the channel incorrectly or it is because of your receiver.

But don’t worry, this problem can also be fixed. In this case, you need to go through some complex solutions. So, keep reading this article by the end carefully.

Why Is Dish Dual Mode Not Working?

If your dish dual mode is not working, then firstly, you need to ensure that your single mode is working. If not, then the problem is with the dish network.

On the other hand, if the single mode is working perfectly, and the dual mode isn’t working, then it is probably because the dual mode is set to an incorrect channel.

However, other causes can trigger this issue too. Here are the most common causes for a dish dual mode not to work:

• If the receiver is damaged or has gone bad, then it will prevent you from controlling or going to the dual mode.
• If the remote address is the same for both – single and dual modes, then both modes will be controlled with a single remote.
• If you chose a different or wrong channel on the dual mode, then it will interrupt the functionality and the dual mode won’t work.
• As the dual mode shows satellite channels, if there is any issue with the satellite or power outage in the area, then the dual mode won’t work until the satellite issue is fixed. This is a temporary issue.

Now you know the possible causes of why the dish dual channel not working, it will be easier for you to choose the actual solution to this problem. Let’s find the proper troubleshooting method in the section below.

How to Fix Dish Dual Mode That Isn’t Working?

Before going any further with the troubleshooting methods, have you rebooted your dual network receiver and TV yet? If not, then do it at once. Because this issue can often be solved by rebooting the devices.

If rebooting didn’t work, then follow the given solutions below to fix the issue:

Solution 1: Hard Reset/Power Cycle The Device

Sometimes, doing a power cycle or hard resetting a device can solve major issues. And many users have been benefitted by doing so, that’s why we suggest you give it a try!

Follow the steps below to perform a hard reset:

• Step 1: Unplug the power adapter from the outlet including all the cables from the device.
• Step 2: Leave your device unplugged for up to 5 minutes.
• Step 3: Plug the power adapter back into the outlet and connect all the peripheral devices and check if the dual mode not working issue is resolved or not.

Note: Plug the power adapter directly into the wall AC outlet instead of using any alternative devices such as plug adapters.

Solution 2: Setup the Correct Channel

If you have used wrong channel for dual mode then it will interrupt the functionality.

Follow the steps below to change the channel in the dish dual mode:

• Step 1: On your dish, go to the Settings page.
• Step 2: Enter into the Modulator Setup tab.
• Step 3: Highlight TV2 by pressing the right arrow on your remote.
• Step 4: Change the channel number to 60 using the up and down arrows on your remote.

If your TV1 is set on channel no. 62, then the TV2 will work on channel no 60. So, ensure that your single mode is set to 62.

If you already have selected the correct channel for your dual mode yet it is still not working, then follow the next method below.

Solution 3: Fix the Remote Address

It is very important for you to set the different addresses for TV1 and TV2. Otherwise, the remote will only work for the TV1 or single mode and the TV2 or dual mode won’t work.

Note: You need both single-mode and dual-mode remotes to change the remote address.

Follow the steps below to change the remote address:

• Step 1: In the dish, go to Settings and click on Installation.
• Step 2: Go to the System Info One tab and highlight the TV2 window using the right arrow.
• Step 3: Press the satellite button on your TV1 remote.
• Step 4: Click the “2” button and wait until the LED blinks 3 times.
• Step 5 Press the Record button and wait until the remote address for TV2 successfully changes to 2.

Important: If you have a dual satellite receiver in your household, then remove the antennas to avoid changing the remote address.

Solution 4: Factory Reset the Dish Receiver

If you’ve accidentally changed any settings in the dish receiver, then your dual mode may not work. Factory resetting the dish receiver will change the settings to their factory default and will automatically fix any fault with the settings.

Follow the steps below to factory receive the dish receiver:

Step 1: Press the “Menu button” and the “Home button” 3 times while your dish receiver is turned on.

Step 2: Navigate to Receiver > Tools > Reset to factory defaults > Reset Receiver to factory defaults.

Step 3: Select Confirm on the pop-up window.

Step 4: Wait for a while until the receiver restarts.

After resetting the dish receiver, wait at least 10 minutes before checking the dual mode.

If this can’t help fix the issue with your dual mode, then check the cables for TV1 and TV2 and replace the faulty cables.

Frequently Asked Questions (FAQs)

Why Is My Dish Remote Not Working on TV2?

The most common reason for a remote to not work on TV2 is – the same channel has been selected on both TV1 and TV2. As the same channel setup is being used by the remote, only TV1 is working while pressing the remote but TV2 isn’t. It happens because both modes can’t be controlled at the same time. Setting the correct channel for both modes will fix the issue.

Can I Watch Two Channels at The Same Time on Dish?

No, you cannot watch two channels at the same time on a dish without any third-party tool. Yes, it means you can do it using PIP. PIP will let you view two channels at the same time while keeping the secondary screen as a small screen on the corner of your TV.

What Channel Does My Second TV Need to Be on For Dish Network?

By default, the first TV, or TV1 is set to channel 62 and the second TV or TV2 is set to channel 60. If the picture doesn’t appear on channel 60, then try channel 73 on your dish network.

How Do I Change the Mode on Dish?

You can change the mode on the dish easily using the remote. Just press and hold the Mode button on your remote for about 3 seconds and release it when all the mode buttons light up. The mode you’ve selected can be identified by observing the mode button. The selected mode button will blink.

What Does Dual Mode Mean on Dish Network?

Dual mode allows you to watch different programs on two separate TVs. If you choose the same channel for both remotes – remote#1 and remote#2, then the remote can control both TV1 and TV2. On the other hand, in dual mode, the channels are set differently and the outputs for TV1 and TV2 are different.

Conclusion

All the possible and common reasons including relevant solutions for the dish dial mode not working issue are given in this article and we hope now you can fix your dish dual mode by applying the above solutions. Don’t forget to share with us in the comment section below and include the solution that will have helped you resolve the issue with the dish dual mode. In none of the above methods help you fix the problem, then you always have the option in your hand to contact Dish customer service.