How to Run Coax Cable from Outside | Easy Coax Setup Guide

A person can run a coax cable from outside to inside by himself for internet or TV setup. Sometimes, it costs some money if you take an electrician for running cable from outside or extending it. There you have to pay for the electrician. But if you follow the steps which are given below, then you can easily do this job by yourself. So far, for doing this, you need the following things. The things are a coax cable, a coax cable wall plate, a long drill bit, a weather sealer, and a 3-way cable splitter to a cable box.

How to Run Coax Cable from Outside

Here are the steps that will help you to run coax cable from outside. Follow them properly and get your job done.

Step 1: First of all, you need a drill machine. That will help you to make a hole from where you can enter your coax cable from outside to inside. So, you have to make a hole inside the wall near the ground.

Step 2: Then, you have to pull the coax cable from the hole towards the inside from the outside. You need to cut one of the ends of the coax cable so that you can easily feed it back through the wall.

Step 3: Now, you need to fit this exposed coax cable to the connector and the splitter. Moreover, you can use the 3-way splitter if you do not want to replace any existing connection.

Step 4: Now, you need to slide the plastic bushing onto the coax cable before you feed the coax cable back inside. You can now use electrical tape for taping the coax cable to the bit.

Step 5: Now, you need to pull the drill bit back pulling the cable through the wall.

Step 6: Then, you have to press the plastic bushing into the outside wall. Here, you need to make the hole a bit larger so that you can easily push the bushing.

Step 7: Now, you need to cut the drywall and you need to fasten the low voltage bracket. You have to strip the coax cable and fold the wire shielding against the outer insulation.

Step 8: Now, you have to push the connector onto the coax cable and twist the connector. You have to twist the connector very firmly so that it does not come out.

Step 9: You have to connect the coax to the back of the wall plate. Then, you have to secure the wall plate to the bracket.

Step 10: You have to protect the cable from damage. For this reason, you have to use the silicone around the bushing as well as around the coax.

That is how you can run a coax cable from outside to inside.

Frequently Asked Questions

Can I run coaxial cable next to electrical?

No, it’s suggested to not run coaxial cable too close to electrical wire. Because the electrical wire can cause interference. That’s why, make distance of at least 6 inches between two of these wire.

What should I use to protect outside COAX cable?

When you are running the coax cable outside, then you should use insulation to protect it.

Conclusion

By following the above procedure, you can easily solve your problem. We assure you that you are going to do the task without any problem with the above procedure. Hope that you have enjoyed this article. Here we have tried to make the procedure easy for you. Thanks for visiting our page. Stay connected and stay safe. Best of luck.