How to Get a Cell Phone Past a Metal Detector | 5 Easy Tricks

A metal detector isn’t only able to detect metal, but also can detect cell phones. If you are concerned about your cell phone getting passed through a metal detector then this article is just for you.

We are going to show you how a metal detector gets a phone and will provide you with some tips on how to get a cell phone past a metal detector.

So, without wasting any time, let’s get familiar with the strategies that you can utilize to get your phone past a metal detector.

Before we delve into these tricks, it’s essential to emphasize that attempting to bypass security measures like metal detectors can have serious legal and ethical implications. This article is meant for educational purposes only and should not be interpreted as an endorsement of any illegal activities. Always respect the rules and regulations of the place you’re visiting, and consider the potential consequences of your actions. Use this information responsibly and at your own discretion.

5 Methods of How to Get a Cell Phone Past a Metal Detector

To get a cell phone past a metal detector, you need to be tricky. Here are the 5 most effective tricks for you:

1. Wrapping

It may sound funny but wrapping can help your cell phone get through the metal detector without being detected.

You need to put the phone inside a casing and wrap the insulating material using bonding tape. It will dodge the sensitivity of a metal detector and help the phone out of reach of the metal detector.

Many think that the thickness of the insulating material should be 10 inches. But it isn’t applicable every time. The sensitivity of a metal detector is as wide as the length of its want.

If the wand is long, then sensitivity will be high and if the wand is short, then sensitivity will be low. Normally, metal detectors with short wands are used in checking so, at least 5 inches of insulating material can prevent the phone from detecting.

2. Dodging

Can the sensor of a metal detector be dodged? Yes, you can dodge the sensor of a metal detector by placing the cell phone behind the phase where the sensor is located.

The sensitivity of a metal detector is in an orbit. It has a range and once a cell phone is inside the range, it can detect it.

If you can put the cell phone at the place where the orbit begins, then the sensor will be unable to detect the phone and you can pass through the metal detector without being detected with your cell phone.

3. Total Separation

Another trick that you can apply is to put the phone in the midst of a book that has hardcovers. This is a common tactic that most people follow to save their phones.

However, there is only a 69% chance of not being detected in this technique. If the sensitivity of the metal detector is high, then this trick may not save the phone. But if the sensitivity of the metal detector is set to the universal mode, then it won’t be detected.

You can also observe the activity of the operators and stick the wrapped phone with a bond tape to your body where the operators don’t search with the metal detector.

4. Electric Spoofer

To beat the intelligence of the sensor of a metal detector, the electric spoofer is undoubtedly an extraordinary strategy.

The sensor of a metal detector emits lights to detect a cell phone. If you can set some LED lights on the exterior part of the cell phone, then it can easily distract the light from the sensor of a metal detector.

You just need to go to a technician and make a microdevice that can emit the same light as a metal detector and put it outside the cell phone.

5. Wrap with Metals

As the metal detector detects metals, you can wrap your phone with metals to make it undetectable. It doesn’t mean that you really need to wrap it with metals. You can use a tin container to save your phone.

If you can wrap your phone with thick insulation material and put it into a tin container depending on the size of your phone, and finally, fill the container with other allowed materials, then the phone image will be blurry under the metal detector which will confuse the operators.

In this way, you can easily get your cell phone passed through the metal detector.

Frequently Asked Questions (FAQs)

Will a Phone Go Off in A Metal Detector?

Yes, a phone can be easily detected in a metal detector. The metal detector doesn’t look for the cell phone signal to detect a cell phone. It only detects electrically conductive metals. The circuit board and the battery of a cell phone have electrically conductive metals which can easily be detected by a metal detector. So, no matter whether the cell phone is turned off or turned on, it can’t get past the metal detector.

How Does a Metal Detector Detect Cell Phones?

A misconception is common among people that a metal detector uses a magnetic field to detect metals, but it isn’t true. In fact, the metal detector detects metals that are electrically conductive, not magnetic. If the metal detector uses the magnetic field, then, it wouldn’t be able to detect cell phones that have solid-state-storage which is unaffected by the magnetic field.

Does Aluminum Foil Block Cell Phone Track by a Metal Detector?

Unfortunately, No. An Aluminium foil is unable to hide a cell phone from a metal detector. You may think that aluminum can’t be affected by the magnetic field, then how can it be detected by the metal detector? But as the metal detector uses electrical conductivity, to detect metals, it can easily detect aluminum foil as it is also electrically conductive.

What Is the Greatest Weakness of Metal Detectors?

A metal detector can easily be distracted by false alarms and interference. These are the great weakness of a metal detector. If you can bring watches, toys, or other electrically conductive objects under the metal detector, then a false alarm will occur that can confuse the operators. Again, if you can bring any device that can create a magnetic field or interfere with the lights of the metal detector, then the metal will be undetectable using the metal detector.

Which Is the Most Difficult Metal Detected by Metal Detector Sensor?

The most difficult metal that can be detected by a metal detector is stainless steel and the easiest metal to be detected by the metal detector is typically ferrous. However, the clay, plastic, and waxed brown paper are undetectable by a metal detector.

Conclusion

Dodging a metal detector is not so simple. But the tricks and techniques to get a cell phone past a metal detector are 100 % effective and unique. So, hopefully, you can now easily pass your cell phone through a metal detector without being detected by applying these tricks. If you have any queries or confusion regarding this topic, don’t hesitate to ask in our comment section below.

Thanks for reading.