How to Charge Cobra Microtalk Walkie-Talkies (Simple Guidelines to Charge)

To charge your Cobra Microtalk Walkie Talkies, simply attach the provided charging cable to the micro USB connection on the back of each unit. Then connect the other end of the cable to a USB power source, such as a PC or laptop. The walkie-talkies will start charging automatically and will be fully charged in around 3 hours.

Your Cobra Microtalk walkie-talkies are built to last, but you’ll need to recharge them to extend their life. Here are some tips to help you charge Cobra Microtalk walkie-talkies in the easiest way possible.

About Cobra Microtalk Walkie Talkies

Cobra microtalk Walkie-Talkies are a great way to stay in touch with friends and family, especially while you’re on the go. They’re compact, lightweight, and simple to use, making them ideal for treks, camping vacations, and other outdoor activities. And, best of all, they don’t require a cell phone signal or a data plan to function.

Precautions for Charging Your Cobra Microtalk

• To begin, make sure your Cobra Microtalk Walkie-Talkies are turned off.
• Next, locate the charging station for your walkie-talkies.
• Once you’ve located the charging dock, connect it to a power outlet using the provided AC adapter.
• Place your Cobra Microtalk Walkie-Talkies on the charging dock after connecting it to a power source.
• Plug the other end of the AC adapter into an outlet or extension cord and turn it on.
• Allow your walkie-talkies to charge for at least four hours before removing them from the dock and using them.
• Once all batteries have been charged, turn off any unused power sources and enjoy your Cobra Microtalk Walkie-Talkies.

How Do I Charge Cobra Microtalk Walkie-Talkies

Here are a few options.

1. Connect the Battery Charger

First, gather your resources. You’ll need the battery charger that came with your Cobra Microtalk walkie-talkies and the batteries themselves.

2. Attach Battery Pack 

If your walkie-talkie came with a battery pack, connect it now. Check that the pack is fully seated and that the connections are secure. If you’re using AA batteries, place them in the battery compartment according to the polarity diagram on the compartment lid. Close the compartment cover and secure it firmly once all batteries have been installed.

3. Charge Microtalk Walkie-Talkies with the Vehicle’s Cigarette Lighter

If your car has a cigarette lighter, you can use it to charge your Cobra Microtalk walkie-talkies. Just take these simple instructions.

• Connect the adaptor cord from the Cigarette Lighter Adapter to the outlet on the Charging Station’s side.
• Plug one of your Cobra Microtalk Walkie-Talkies into one of the three USB ports on either side of the Charging Station. 
• Repeat for each remaining walkie-talkie.
• Start your vehicles.

4. Use Transceiver Power Switch to Transmit

After plugging in the power supply, turn on the transceiver. This is usually near the battery compartment on the unit’s back. Once found, turn on the switch. A green light indicates power to the unit. Check your power supply for a green light if you don’t see one.

Set the Transceiver Mode Switch to Transmit

• To begin, locate the transceiver mode switch on your Cobra Microtalk walkie-talkie.
• Second, ensure that the power is turned off.
• Third, press and hold the push-to-talk (PTT) button while switching the mode switch to transmit.
• Fourth, depress the PTT button and turn on the power.

What to Do After Fully Charged the Microtalk Walkie-Talkies

Now that your batteries are fully charged, turn the volume control knob on your Cobra Microtalk walkie-talkies. Set it between 1 and 4, with 4 being the loudest setting. Here’s how to do it:

First, locate the volume control on one of your walkie-talkies. It should be close to where you’re holding it. Then spin the screw to set the level from 1 to 4, with 1 being the lowest and 4 being the highest.

What to Do if Cobra Walkie-Talkie Doesn’t Charge Properly

There are a few things you can do if your Cobra Microtalk walkie-talkies are not charging properly.

• First, double-check that you have the correct charger. Cobra Microtalk walkie-talkies require a particular charger with a specific voltage rating. Check the back of your charger to ensure compatibility with your walkie-talkies.
• Second, make sure your walkie-talkies have a charging port. Check that it is clean and that no impediments are blocking the charger from making contact.
• Third, try a new power outlet. If the current one fails, try another outlet that you know works well.
• Finally, if none of these methods work, you may need to replace your charging cord or your walkie-charging talkie’s port. If this is the case, please contact Cobra’s customer care.

How Do I Change the Battery in My Cobra Walkie-Talkie

To replace the battery in your Cobra walkie-talkie:

• First, remove the back cover.
• Open the battery compartment.
• Remove the old batteries and dispose of them carefully.
• Replace the batteries in the compartment, making sure they are properly aligned.
• Replace the back cover after closing the battery compartment.
• To activate your walkie-talkie, press and hold the power button for a few seconds.
• You are now ready to utilize your walkie-talkie.

How Long Do Cobra Walkie-talkies Take to Charge

It takes roughly 8 hours to charge a Cobra walkie-talkie from the dead to full. To get the most out of your battery, charge it overnight. You’ll have some peace of mind knowing that you’ll always be able to use your Cobra walkie-talkies when you need them.

Last Words

Now that you know how to charge your Cobra Microtalk walkie-talkies, you can keep them charged and ready to use at all times. We recommend fully charging them before using them for the first time, and then leaving them on the charger while not in use so they’re always ready to go.