[Fix] DeWalt Radio Won’t Turn On (100% Working)

If your DeWalt radio won’t turn on, check the battery or power source, make sure the power button is functioning properly, and inspect the fuse if applicable. If the issue persists, consult the user manual or contact DeWalt customer support for assistance.

However, radios are very fragile and they can get destroyed very easily in a heavy construction site. In comes, the DeWalt radio; specifically made for this kind of purpose. It is built keeping construction and other job sites in mind.

Even though it is very sturdy and also ideal for taking to a construction site, it is an electronic device. And electronic devices are known to create problems from time to time. Several issues might occur but one of the common ones is that the DeWalt radio won’t turn on. Here we will be discussing the reason behind it and how to fix it.

Why the DeWalt Radio Won’t Turn On and How to Fix it

There are several reasons why your DeWalt radio might be acting up. Here’s what we think might be happening and how you can fix them:

1. Power Issues

Most of the time DeWalt radios won’t turn on because of power issues. Either the power cable is loose or the batteries might have dried up. Try changing the power cables and the batteries and see if that works for you.

If that doesn’t work, there is a switch on the power cord input that serves as a selector for battery and AC power. Whenever the power cord is inserted, it triggers the switch, and the battery powers down. If the cord is removed the battery activates. See if this switch is working and if not, replace the switch.

2. Damaged Fuse

Sometimes the fuses inside get burned out. It can cause the rechargeable option of the device to disintegrate and leave you tethered to a wall socket or make you buy dozens of alkaline batteries. In case this happens, follow the simple process below:

1. Unplug the device.
2. Unscrew the fastener screws holding the two halves of the device together.
3. Pry open the outer shell that is glued together.
4. Locate the damaged fuses. They are about an inch long and cylindrical in shape.
5. Remove the damaged fuses.
6. Install new fuses.
7. Close the outer box and screw them in place.

3. Faulty Antenna

In the case of an antenna failure, it can damage the whole device if you’re not careful. But you can buy an antenna easily from an online shop or your local retailer. It is both affordable and easily replaceable. We recommend you In the case of an antenna failure, it can damage the whole device if you’re not careful. But you can buy an antenna easily from an online shop or your local retailer. It is both affordable and easily replaceable. We recommend you replace the stock antenna with a loop of 12-2 wires. It also has a much better reception.

4. IC Chip Failure

If the IC chip somehow gets fried, it can cause the DeWalt radio to not turn on. In case that happens, you will need to open up the outer casing as mentioned above and check if it is indeed damaged. You will have to replace it with a new chip since these chips are very sensitive and there is no other way of fixing it if it gets damaged.

How to Prevent DeWalt Radio Won’t Turn On

Of course, the DeWalt radio is very sturdy but it isn’t indestructible. And if you are taking your DeWalt radio to your job site, there are numerous ways it can get damaged. Falling bricks and debris are just some examples.

The simple solution is to place the radio where it can’t get damaged easily. External damage usually causes most of the issues so be careful of where you’re putting down the device. The speakers in these types of radio are very loud so you won’t have to worry if it is a little far from where you are.

The DeWalt radio is one of the favorites among construction workers for reasons such as this. But be sure to not let any external harm come to your device.

Frequently Asked Questions (FAQs)

Is there a reset button on DeWalt radio?

Yes, there is a reset button on DeWalt radios. And should you need to restore your DeWalt radio to factory settings, follow the simple instructions below:

1. Enter AUX mode by pressing the 1 key and the ENT key at the same time.
2. Navigate through the menu to the Factory Reset option and hit the ENT key.
3. Navigate to and hit the ENT key again to reset the device.

Is a DeWalt radio waterproof?

Yes, some models of the DeWalt radio are waterproof. If you’re taking your DeWalt radio to a job site where there are possibilities of your radio getting wet, make sure you have a waterproof model.

Does a DeWalt radio charge battery?

A DeWalt radio can run off and charge DeWalt slide pack battery packs including 20V Max and Flexvolt 20V or 60V Max at 3 AMPs when plugged into an AC outlet. The unit is designed to include woofers, tweeters, and air ports to provide clear and rich sound at all volume levels.

Conclusion

The DeWalt radio is a heavy-duty radio built to outlast most external damages. But that doesn’t necessarily mean that it can’t get damaged. But we hope we were able to help you fix your DeWalt radio not turning on.