[7 Fixes] Dynex Tv Not Turning On

There are several TV companies out there and Dynex is one of them. It is one of the popular manufacturing organizations and they have a fairly good clientele. But, nowadays, both the old and new users are facing the TV not turning issue.

The headline has dragged you here which means you are facing a problem with your Dynex TV, right? This problem arises when your TV’s power supply is damaged or you have a problematic remote.

Take a breath of relief because we’re here with a guideline that’ll help you to turn on your Dynex TV and they are so easy to follow. So, let’s begin then.

Why is the Dynex TV Not Turning On?

There can be two scenarios, the first one is your TV is getting power and the red light is on and another one is there is no light which means it’s not getting any power. This issue can happen for several reasons.

1. The Red Light is On but TV is Not Turning On

If this happens then the following reasons are responsible.

• Problematic Remote Sensor.
• Remote sensor is interfered with by other devices.
• Remote batteries have drained out.
• Main AC fuse has blown due to a short out of Diodes.

2. TV is Not Getting Power

If this happens then the following reasons are responsible.

• Hardware issue of the TV.
• The power adapter is damaged.
• Issue with your power source.

In the next section, we have provided the fixes for both of the issues that are not allowing you to turn on the TV.

How to Fix the ‘Dynex TV Not Turning On’ Issue?

Follow the fixes which are provided below to turn on your Dynex TV. First, try to fix your remote then follow the rest of them if the issue doesn’t resist.

Method 1: Perform Remote Power Cycle

Sometimes, misplacement of the batteries can cause the remote not working issue or sometimes using batteries for a long period, resist the remote buttons work properly.

For this take out the batteries from the remote and press each button. After this, put them back on the remote and check it. If the problem doesn’t solve, follow the next fix.

Method 2: Check with Remote Batteries

Check with your remote batteries, whether they are workable or not. Replace them with the new ones and try to on the TV. If the issue remains, do follow the next fix.

Method 3: Check with Another Remote

If both of the above fixes failed, then you have a faulty remote. You should change it and buy a new one. Now, check with the new one.

If all of the above fixes don’t work, follow the next fixes to solve the issue.

Method 4: Perform a Boot by Using the Power Button

If the remote is not working or you don’t have a spare remote or batteries to check then you can use the TV’s power switch to boot the Dynex TV. Try the power button, press it and wait for turning on the TV.

If still, it remains the same, follow the next fix.

Method 5: Perform a Soft Reset

To perform a soft reset on your Dynex TV, find out the power button of your TV. Basically, it locates in between the Menu and Volume buttons. Press the power button for at least one minute and then check whether the issue persists or not.

Remember, you need to press it for at least 60 seconds.

Method 6: Perform Dynex TV Power Cycle

If the soft reset failed, then do a power cycle on your Dynex TV. A power cycle is basically for replenishing the whole electrical supply on your TV. To perform a power cycle,

• Press the power button once and unplug the power adapter.
• Now, wait for 5 minutes, and after that connect the adapter.

Now check whether the TV is turning on or not.

Method 7: Check with the Power Source and Adapter

If all the fixes failed or didn’t let you check then check with your adapter and power source. Sometimes, the adapter is damaged and your TV doesn’t get any power. Also, a problematic power source also is an obstacle. Check with the power source and try to change the power strip.

If all the fixes failed then you should contact your provider or the technician to fix the hardware issues of your TV.

Frequently Asked Questions (FAQs)

How do I turn on Dynex TV without a remote?

To turn your Dynex TV without a remote do follow the following steps.

• Go to the side of the TV and press the Menu and vol down buttons together.
• Now, hold the two buttons, and in the meantime, press the power button of the TV until the blue light comes ON.
• Hold up the Menu and Volume down buttons for 10 seconds. Your TV will turn on.

How do I know if my TV blew a fuse?

To check the fuse, take a screwdriver to unscrew the fuse cap holder. After unscrewing the fuse cap holder, look carefully inside and if you see a gap between the wires then your TV has blown a fuse.

Can I turn on my Dynex TV on my phone?

Yes, you can. Download the Dynex TV remote app on your phone and install it. Now, you can control your Dynex TV with your phone.

Conclusion

So far now, we have provided the reasons and the remedies to solve the not turning on issue. Follow all of them one by one, and if you have a warranty available, just go to the store and return the TV. This issue is very problematic and annoying.

Hope that you are able to turn on your Dynex TV by now. If there are any further queries, feel free to comment below. Gracias!