How to Connect Antenna to TV Without Coax

Trying to connect older antenna devices to newer television sets can be a bit of a pain. Because modern-day TVs don’t come with coax inputs anymore. 

So, how to connect the antenna to the TV without coax? 

You will need a converter box to convert that coax signal from your antenna to something that can be transmitted to your TV via the HDMI cable.

How to Connect Antenna to TV Without Coaxial Input

After properly hooking up the TV antenna to complete the process, you should have a coaxial converter box. Converter boxes were created to convert the digital broadcast signal to analog television.

[aawp box=”B0054EILOE” description=”none” template=”horizontal”]

To Hook up Cable to TV Without Coaxial Input as HDMI input is not common for all TVs, Please Refer the Following Steps:

Step 1: find the coaxial connection port in the converter box and attach the coaxial cable to it in order to connect the antenna to TV without coax input. To prevent any unwanted connection loss during use, please make sure you hook the cable tightly.

Step 2:  there will be a red, blue, and green plug that makes up the component video cable. Follow the color code and just make a match with the color combination on the output on the converter box with the color on the plug. Get the RCA cable to listen to the audio and attach connect them to the RCA ports of the connection device. the video input mode should be attached to the applicable port of your tv.

Step 3:  power on your tv.

Step 4:  Press the input button of your remote and please choose the video option.

This procedure should start to display on your tv screen.  

Here is one of the best remote control digital converter box you can buy in order to use a C though you may need an outdoor antenna setup. You can use this on multiple TV and the TV signal strength will also be better. The channel scan is automatic and convenient too.

[aawp box=”B01EW098XS” description=”none” template=”horizontal”]

To Hook up an HD Antenna (Indoor) to Your TV using coaxial wire as satellite receiver, Please Refer the Following Steps:

An indoor antenna lets you worry-free about the unwanted problem. It is also called a directional antenna. It will let you worry-free from the annoying setup of rooftop antennas and attached cables to your tv. You can easily hook up an antenna to tv with the help of coaxial cable if the antenna is built for indoor facility use. The antenna signal has to be good for that for better tv reception. Please follow the below process to do that without coaxial input:

Step 1: first of all, power off your tv.

Step 2: carefully attach one end of the coaxial cable into the ‘RF IN’ port of your digital tv. The other end should be connected to the output jack of the antenna.

Step 3: make sure to a tighter connection of jack at both ends of the cable.

Step 4: Connect with the power source or plug in the power source to the indoor antenna.

Step 5: power on your tv, the contents should start display on your tv screen. For a better signal, please place your device near your window or open place.

Notes:

1. The coaxial cable used to eliminate interference and noise from a radio wave to the hdtv antenna.
2. The coaxial cable should not bundle with the power adapter or other cables.
3. If the antenna is not installed correctly, contact with qualified service personnel.
4. If the signal level is weak, the picture may be distorted. To solve this problem, you should place the antenna near your window or use a high direction outdoor.
5. If some of the channels picture quality is good but poor on others, then you should understand that the problem may be for the weak signal from the broadcaster or cable tv provider.
6. If you connect to cable tv without a set-top box and experienced poor picture quality, you may need to install a set-top box to solve this problem and to improve display quality and signal reception. You can also connect the coax to the TV without inputs.

Are you facing a problem with how to get antenna tv without coax input? Here you are. This will help you out in this case.

[aawp box=”B07D4YW5HR” description=”none” template=”horizontal”]

If you are looking for coaxial cables for HDTV, then we suggest you take a look at this product.

[aawp box=”B07HB24CHL” description=”none” template=”horizontal”]

Frequently Asked Questions and Answers

What is alternative for coaxial cable?

Ethernet over Coax (EoC) is a good alternative for traditional coaxial cables. They are also known as multimedia over coax. It delivers ethernet signal over the coaxial cables.

Can we use normal cable instead of coaxial cable?

No, you cannot use normal cable instead of coaxial cable. Because normal cables don’t have those two different layers that a coaxial cable has.

Can I use my phone as a TV antenna?

No, you can’t use your phone as a TV antenna. You need a digital TV tuner box for smartphones. Those boxes have built-in antenna inside them.

Conclusion

We hope we were able to help you solve your coax cable problem. Using a converter box is the easiest and most popular solution if your TV doesn’t come with a coax input system. Good luck and thanks for reading.